Publications of Dr. Gian Piero Celata

Copies of the publications may be asked to celata@enea.it

1.    G.P. CELATA and F.V. FRAZZOLI, High Void Fraction Measurements in Full Scale Heat Transfer Tests, Nuclear Technology, Vol. 54, pp. 422-425, September 1981
2.    G.P. CELATA, M. CUMO, G.E. FARELLO, P.C. INCALCATERRA and A. NAVIGLIO, Thermodynamic Disequilibrium in the Critical Flow of Subcooled Liquids, Nuclear Technology, Vol. 60, pp. 137-142, January 1983 (also as CNEN Report RT/ING (81) 14)
3.    G.P. CELATA, M. CUMO, G.E. FARELLO and P.C. INCALCATERRA, Critical Flows and Jet Forces, Proc. ASME-AIChE National Heat Transfer Conference, Seattle 1983 (also as CNEN Report RT/ING (82) 18)
4.    G.P. CELATA, M. CUMO, G.E. FARELLO and P.C. INCALCATERRA, Critical Flow of Subcooled Liquids, Proc. 7th International Heat Transfer Conference, September 6-10, München 1982
5.    G.P. CELATA, M. CUMO, G.E. FARELLO and P.C. INCALCATERRA, Experimental Results on Critical Flows, ENEA-MARVIKEN Contract, ENEA Report NDA6 2TS4B 020, 1982
6.    G.P. CELATA, M. CUMO, G.E. FARELLO and P.C. INCALCATERRA, Experimental Results on Critical Flows: Tests Performed on "B" Type Test Section (L/D=100; D=5mm), ENEA Report NDAG 2TS4B 024 / NWAE 2TS4B 83048
7.    G.P. CELATA, R. CENTI, M. CUMO, G.E. FARELLO and P.C. INCALCATERRA, Critical Flow Jets Investigations for Engineering Applications, Proc. 3rd Multiphase Flow and Heat Transfer Meeting, University of Miami, April 18-20, 1983
8.    G.P. CELATA, M. CUMO, G.E. FARELLO and P.C. INCALCATERRA, Metastability Delays in Critical Flows, European Two-Phase Flow Group Meeting, Zurich, June 14-16, 1983
9.    G.P. CELATA, M. CUMO, F. D'ANNIBALE and G.E. FARELLO, Two-Phase Boundary Layers in Critical Flows, Proc. Colloquium EUROMECH 176, Villard de Lans, Grenoble, September 1983
10.    G.P. CELATA, M. CUMO, G.E. FARELLO and P.C. INCALCATERRA, Experimental Results on JF 2 Plant: Saturated Liquid and Steam, ENEA Report NWAE 2TS4B 83044, October 1983 (in italian as ENEA NWAE 2TS4B 84017, May 1984)
11.    G.P. CELATA, M. CUMO, G.E. FARELLO and P.C. INCALCATERRA, Two-Phase Jet Flows and Forces, Proc. IAEA Specialists Meeting/Workshop on Experimental and Modeling Aspects of Small-Break LOCA. Budapest, October 3-7, 1983
12.    G.P. CELATA, M. CUMO, G.E. FARELLO, M. FURRER and P.C. INCALCATERRA, ENEA - Heat Transfer Laboratory. The More Important and Recent Results Obtained in Two-Phase Critical Flows and Flooding Experiments, Giornate di Studio sul Tema "Multiphase Flow", Università degli Studi di Roma "La Sapienza", November 22-25, 1983
13.    G.P. CELATA, M. CUMO, G.E. FARELLO, P.C. INCALCATERRA and R. CENTI, Physical Insight in the Evaluation of Jet Forces in Loss-of-Coolant Accidents, Proc. 5th International Meeting on Thermal Nuclear Reactor Safety, Karlsruhe, September 10-13, 1984
14.    G.P. CELATA, M. CUMO, G.E. FARELLO and M. FURRER, Flooding Experiments in a Rectangular Geometry, Heat & Technology, Vol. 4, n. 1, pp. 47-57, 1986 (also as ENEA Report RT/TERM 85/3)
15.    G.P. CELATA, M. CUMO, F. D'ANNIBALE and G.E. FARELLO, Two-Phase Flow Models in Unbounded Two-Phase Critical Flows, Nuclear Engineering & Design, Vol. 97, pp. 211-222, 1986 (also as ENEA Report RT/TERM 85/4)
16.    G.P. CELATA, M. CUMO, G.E. FARELLO and G. FOCARDI, Direct Contact Condensation of Steam on Slowly Moving Water, Nuclear Engineering & Design, Vol. 96, pp. 21-31, 1986 (also as ENEA Report RT/TERM 85/2)
17.    G.P. CELATA, M. CUMO, F. D'ANNIBALE and G.E. FARELLO, A Computation Method for Mass Flow Rate Predictions in Critical Flows of Initially Subcooled Liquid in Long Channels, Heat & Technology, Vol. 3, n. 3-4, pp. 22-42, 1985 (also as ENEA Report RT/TERM 85/6)
18.    G.P. CELATA, M. CUMO, G.E. FARELLO, X-Rays Analysis in Unbounded Two-Phase Critical Flows, Proc. Specialists Meeting on SB-LOCA Analyses, Pisa, June 1985
19.    G.P. CELATA, M. CUMO, F. D'ANNIBALE , G.E. FARELLO and T. SETARO, Flow Transients Experiments with Refrigerant-12, Revue Generale de Thermique, Vol. XXV, N. 299, 1986 (also as Report RT/TERM 86/2)
20.    G.P. CELATA, M. CUMO, G.E. FARELLO and G. FOCARDI, A Theoretical Model of Direct Contact on a Horizontal Surface, Int. J. Heat Mass Transfer, Vol. 30, n. 3, pp. 459-467, 1987 (also as ENEA Report RT/TERM 86/1)
21.    G.P. CELATA, M. CUMO, F. D'ANNIBALE, G.E. FARELLO and T. SETARO, Reassessment of Forced Convection Heat Transfer Correlations for Refrigerant-12, ENERGIA NUCLEARE, Vol. 3, n. 1, April 1986
22.    G.P. CELATA, M. CUMO, G.E. FARELLO and G. FOCARDI, Direct Contact Condensation of Superheated Steam on Water, Int. J. Heat Mass Transfer, Vol. 30, n. 3, pp. 449-458, 1987 (also as ENEA Report RT/TERM 86/3)
23.    G.P. CELATA, M. CUMO, F. D'ANNIBALE and G.E. FARELLO, CHF in Flow Boiling during Pressure Transients, in Particulate Phenomena and Multi-Phase Transport, T.N. Veziroglu Ed., Vol. 2, pp. 207-223, Hemisphere Publishing Corp., 1988
24.    G.P. CELATA, M. CUMO, G.E. FARELLO and G. FOCARDI, Direct Contact Condensation of Steam on a Horizontal Surface of Water, Wärme-und Stoffübertragung, Vol. 21, pp. 169-180, 1987
25.    G.P. CELATA, M. CUMO, F. D'ANNIBALE, G.E. FARELLO and S.A. SAID, Critical Heat Flux Phenomena in Flow Boiling during Step-Wise and Ramp-Wise Power Transients, Revue Generale de Thermique, n. 317, pp. 296-303, June 1988 (also as ENEA Report RT/TERM 87/3)
26.    G.P. CELATA, M. CUMO, F. D'ANNIBALE and G.E. FARELLO, The Influence of Non-Condensible Gas on Two-Phase Critical Flow, Int. J. Multiphase Flow, Vol. 14, n. 2, pp. 175-187, 1988 (also as ENEA Report RT/TERM 87/3)
27.    G.P. CELATA, M. CUMO, F. D'ANNIBALE and G.E. FARELLO, Critical Flows in Nuclear Reactor Safety, Latin American J. Heat Mass Transfer, Vol. 10, pp. 155-168, 1987 (also as RT/TERM 86/4)
28.    G.P. CELATA, M. CUMO, CHF during Flow Rate, Pressure and Power Transients in Heated Channels, Invited Lecture at Transient Phenomena in Multiphase Flow International Seminar, Dubrovnik, May 1987 (also as ENEA Report RT/TERM 87/1)
29.    G.P. CELATA, M. CUMO, G.E. FARELLO and T. SETARO, The Influence of Flow Obstructions on Flooding Phenomenon in Vertical Channels, Int. J. Multiphase Flow, Vol. 15, n. 2, pp. 227-239, 1989 (also as ENEA Report RT/TERM 88/3)
30.    G. CARUSO, G.P. CELATA, G. DE GENNARO and A. NAVIGLIO, Model to Simulate Corium-Concrete Interaction during a Severe Accident and its Applications, Proc. Int. Symposium on Severe Accidents in Nuclear Power Plants, IAEA, Sorrento, March 21-25, 1988

31.    G.P. CELATA, M. CUMO, F. D'ANNIBALE, G.E. FARELLO and G. FOCARDI, ATheoretical and Experimental Study of Direct Contact Condensation on Water in Turbulent Flow, Experimental Heat Transfer, Vol. 2, n. 2, pp. 153-172, 1989
32.    G.P. CELATA, M. CUMO, G.E. FARELLO and G. FOCARDI, A Comprehensive Analysis in Direct Contact Condensation of Saturated Steam on Subcooled Liquid Jets, Int. J. Heat Mass Transfer, Vol. 32, n. 4, pp. 639-654, 1989 (also as ENEA Report RT/TERM 88/1)
33.    G.P. CELATA, M. CUMO, F. D'ANNIBALE, G.E. FARELLO and A. MARIANI, CHF Behaviour during Pressure, Power and/or Flow Rate Simultaneous Variations, Proc. EUROTHERM Seminar n. 7, Thermal Non-Equilibrium in Two-Phase Flow, Roma, March 23-24, 1989, Int. J. Heat Mass Transfer, Vol. 34, n. 3, pp. 723-738, 1991
34.    G.P. CELATA, M. CUMO, F. D'ANNIBALE and G.E. FARELLO, Transient CHF in Flow Boiling during Flow Rate and Thermal Power Simultaneous Variations, Experimental Thermal and Fluid Science, Vol. 2, n. 2, pp. 134-145, 1989 (also as ENEA Report RT/TERM 88/5)
35.    G.P. CELATA, M. CUMO, F. D'ANNIBALE, G.E. FARELLO and A. MARIANI, ANATRA - A Computer Code for Transient Critical Heat Flux Analysis with Refrigerant-12, Int J. Heat & Technology, Vol. 8, n. 3-4, pp. 1-29, 1990
36.    G.P. CELATA, M. CUMO, F. D'ANNIBALE and G.E. FARELLO, Direct Contact Condensation of Steam on Droplets, Int. J. Multiphase Flow, Vol. 17, n. 2, pp. 191-211, 1991
37.    G.P. CELATA, M. CUMO and F. D'ANNIBALE, A Data Set of Critical Heat Flux of Boiling R-12 in Uniformly Heated Vertical Tubes under Transient Conditions, Experimental Thermal and Fluid Science, Vol. 5, n. 1, pp. 78-107, 1992
38.    G.P. CELATA, M. CUMO, G.E. FARELLO and A. MARIANI, Preliminary Remarks on High Heat Flux CHF in Subcooled Water Flow Boiling, Heat & Technology, Vol. 8, n. 1-2, pp. 20-42, 1990
39.    G.P. CELATA, M. CUMO and T. SETARO, Flooding in Inclined Pipes with Obstructions, Experimental Thermal and Fluid Science, Vol. 5, n. 1, pp. 18-25, 1992
40.    G.P. CELATA, M. CUMO, G.E. FARELLO and T. SETARO, The Influence of Geometry on Flooding: Channel Length and Diameter, Proc. of the 9th International Heat Transfer Conference, Jerusalem, August 1990
41.    G.P. CELATA, M. CUMO, T. SETARO and S. BANERJEE, A Model for Flooding Prediction in Circular Tubes, J. Thermal Science, Vol. 1, n. 3, pp. 166-177, 1992
42.    G.P. CELATA, M. CUMO and T. SETARO, A Data Set of Flooding in Circular Tubes, Experimental Thermal and Fluid Science, Vol. 5, n. 4, 437-447, 1992
43.    G.P. CELATA, M. CUMO, G.E. FARELLO and T. SETARO, Hysteresis Effect in Flooding, Int. J. of Multiphase Flow , Vol. 17, n. 2, pp. 283-289, 1991
44.    J. SCHMIDLI, S. BANERJEE, G.P. CELATA and G. YADIGAROGLU, Flashing Experiments by Rupture of Vessels Containing Superheated Liquid, European Two-Phase Flow Group Meeting, Ispra, May, 1990
45.    A. CARDELLA, G.P. CELATA, G.P. GASPARI and A. MARIANI, Tests on the Hypervapotron Cooling Technique for Divertor Application, Presented at the 16th Symposium on Fusion Technology, London, 3-7 September, 1990
46.    G.P. CELATA, M. CUMO, G.E. FARELLO, A. MARIANI and A. SOLIMO, Flow Pattern Recognition in Heated Vertical Channels: Steady and Transient Conditions, Experimental Thermal and Fluid Science, Vol. 4, n. 6, pp. 737-746, 1991
47.    G.P. CELATA, Direct Contact Condensation of Steam on Subcooled Water, Keynote Lecture at the Phase-Interface Phenomena in Multiphase Flow, Dubrovnik, 14-18 May, 1990, also in Trends in Heat, Mass & Momentum Transfer, vol. 2, pp. 85-104, 1992
48.    G.P. CELATA and M. CUMO, An Experimental Study of CHF Under Complex and Simultaneous Transient Conditions, Wärme-und Stoffübertragung, Vol. 27, pp. 17-28, 1992
49.    A. CARDELLA, G.P. CELATA and G.P. GASPARI, Heat Transfer and Burnout at High Heat Fluxes in Subcooled Water, International Conference on Multiphase Flows '91, Tsukuba, September 24-27, 1991
50.    G.P. CELATA, M. CUMO and T. SETARO, Hysteresis Phenomena in Subcooled Flow Boiling of Well Wetting Fluids, Experimental Heat Transfer, vol. 5, pp. 253-275, 1992
51.    G.P. CELATA, M. CUMO and A. MARIANI, Burnout in Highly Subcooled Water Flow Boiling in Small Diameter Tubes, Int. J. Heat Mass Transfer, vol. 36, n. 15, pp. 1269-1285, 1993
52.    G.P. CELATA, A Review of Recent Experiments and Prediction Aspects of Burnout at Very High Heat Fluxes, Keynote Lecture presented at the International Conference on Multiphase Flows '91, Tsukuba, September 24-27, 1991
53.    G.P. CELATA, Critical Heat Flux Under Transient Conditions, Trends in Heat, Mass & Momentum Transfer, Vol. 2, pp. 73-84, 1992
54.    G.P. CELATA, Fundamental Studies of CHF in Highly Subcooled Water Flow Boiling: ENEA Experimental Facility and CHF Results, Specialists' Workshop on Divertor Plate Thermal Hydraulics, San Francisco, November 13-14, 1991
55.    G.P. CELATA, Critical Analysis of Correlations and Models for Subcooled CHF Prediction, Specialists' Workshop on Divertor Plate Thermal Hydraulics, San Francisco, November 13-14, 1991
56.    G.P. CELATA, M. CUMO and T. SETARO, Boiling Incipience Hysteresis of Highly-Wetting Fluids in Forced Convection Flow, Proc. of the 1st European Thermal-Sciences and 3rd UK National Heat Transfer Conference, Birmingham September 16-18, 1992
57.    G.P. CELATA and M. CUMO, Burnout at Very High Heat Fluxes, Wärme-und Stoffübertragung, Vol. 27, pp. 233-244, 1992
58.    G.P. CELATA, M. CUMO and A. MARIANI, Enhancement of CHF Water Subcooled Flow Boiling in Tubes Using Helically Coiled Wires, Int. J. Heat and Mass Transfer, vol. 37, n. 1, pp. 53-67, 1994
59.    G.P. CELATA, M. CUMO, A. MARIANI, A. LATTANZI and M. MORLACCA, Fundamental Aspects of Water Subcooled Flow Boiling in Tubes With and Without Turbulence Promoters, Final Report to NET, ENEA Report, NZLE 1RTCO 9202, 1992
60.    G.P. CELATA, M. CUMO and T. SETARO, A Review of Pool and Forced Convective Boiling of Binary Mixtures, Experimental Thermal and Fluid Science, Vol. 9, n. 4, pp. 367-381, 1994
61.    P. ANGLESIO, G.P. CELATA and M. CHIADO' RANA, Standardized Thermal Test Loops for Biomass Heat Generators, Proc. of the 7th European Conference on Biomass for Energy and Environmental, Agriculture and Industry, Florence, October 1992
62.    G.P. CELATA, M. CUMO and A. MARIANI, CHF in Highly Subcooled Flow Boiling With and Without Turbulence Promoters, European Two-Phase Flow Group Meeting, Stockholm, 1-3 June, 1992
63.    G.P. CELATA, M. CUMO and A. MARIANI, Subcooled Water Flow Boiling CHF with Very High Heat Fluxes, Revue Générale de Thermique, n. 362, pp. 106-114, février 1992
64.    A. CARDELLA, G.P. CELATA, G. DELL'ORCO, G.P. GASPARI, G. CATTADORI and A. MARIANI, Thermal Hydraulic Experiments for the NET Divertor, Proc. of the 17th SOFT, Rome, 14-18 September, 1992
65.    G.P. CELATA, M. CUMO, and A. MARIANI, Assessment of Correlations and Models for the Prediction of CHF in Subcooled Flow Boiling, Int. J. Heat Mass Transfer, vol. 37, n. 2, pp. 237-255, 1994
66.    G. CATTADORI, G.P. CELATA, M. CUMO, G.P. GASPARI, A. MARIANI and G. ZUMMO, Hypervapotron Technique in Subcooled Flow Boiling CHF, Experimental Thermal and Fluid Science, vol. 7, n. 3, pp. 230-240, 1993
67.    G.P. CELATA, M. CUMO and T. SETARO, Forced Convective Boiling in Binary Mixtures, Int. J. Heat and Mass Transfer, vol. 36, n. 13, pp. 3299-3309, 1993
68.    G.P. CELATA, M. CUMO, F. INASAKA, A. MARIANI and H. NARIAI, Influence of Channel Diameter on Subcooled Flow Boiling Burnout at High Heat Fluxes, Int. J. Heat and Mass Transfer, vol. 36, n. 13, pp. 3407-3410, 1993
69.    G.P. CELATA, M. CUMO and A. MARIANI, High Heat Flux Burnout in Subcooled Flow Boiling, Journal of Thermal Science, Vol. 4, n. 3, pp. 151-161, 1995
70.    G.P. CELATA, Recent Achievements in the Thermal Hydraulics of High Heat Flux Components in Fusion Reactors, Experimental Thermal and Fluid Science, Vol. 7, n. 4, pp. 263-278, 1993
71.    G.P. CELATA, M. CUMO and T. SETARO, Critical Heat Flux in Upflow Convective Boiling of Refrigerant Binary Mixtures, Int. J. Heat Mass Transfer, Vol. 37, n. 7, pp. 1143-1153, 1994
72.    G.P. CELATA, M. CUMO and T. SETARO, Analysis of CHF Location Sensibility Following Heat Flux and Mass Flux Variations, Int. J. Heat Mass Transfer, Vol. 37, n. 7, pp. 1073-1080, 1994
73.    G.P. CELATA, M. CUMO, A. MARIANI, M. SIMONCINI and G. ZUMMO, Rationalization of Existing Mechanistic Models for the Prediction of Water Subcooled Flow Boiling Critical Heat Flux, Int. J. Heat Mass Transfer, Vol. 37, Suppl. 1, pp. 347-360, 1994
74.    G.P. CELATA, Recent Achievements in Water Subcooled Flow Boiling Critical Heat Flux at High Liquid Velocity and Subcooling, International Symposium/Workshop on Boiling, Condensation and Two-Phase Flow Heat Transfer, Andhra University, January 10-11, 1994
75.    G.P. CELATA, M. CUMO, F. D'ANNIBALE, F. GUGLIERMETTI and G. INGUI', Direct Contact Boiling of Immiscible Liquids, 10th International Heat Transfer Conference, Brighton, August 14-18, 1994
76.    G.P. CELATA, M. CUMO, A. MARIANI and G. ZUMMO, The prediction of the CHF in water subcooled flow boiling, Int. J. Heat Mass Transfer, Vol. 38, n. 6, pp. 1111-1119, 1995
77.    G.P. CELATA, M. CUMO, A. MARIANI and G. ZUMMO, A Mechanistic Model for the Prediction of Water Subcooled Flow Boiling CHF, ENERGIA NUCLEARE, Vol.11, n. 2, pp. 58-74, 1994
78.    G.P. CELATA, M. CUMO, F. D'ANNIBALE, F. GUGLIERMETTI and G. INGUI', Direct Contact Evaporation of Nearly Saturated R 114 in Water, Int. J. Heat Mass Transfer, Vol. 38, n. 8, pp. 1495-1504, 1995
79.    G.P. CELATA, M. CUMO and T. SETARO, Pressure Wave Perturbations Effect on Subcooled Flow Boiling of Well-Wetting Fluids, 2nd International Conference on Multiphase Flow, Kyoto, 3-7 April, 1995
80.    G.P. CELATA, M. CUMO, F. D'ANNIBALE, F. GUGLIERMETTI and G. INGUI', A Theoretical Model for the Evaluation of Direct Contact Boiling of R 114 Jets in Water, Revue Generale de Thermique, Vol. 34, n. 403-404, pp. 417-425, 1995
81.    G.P. CELATA, M. CUMO, A. MARIANI and G. ZUMMO, Preliminary Remarks on Visualization of High Heat Flux Burnout in Subcooled Water Flow Boiling, International Symposium on Two-Phase Flow Modelling and Experimentation, Rome, 9-11 October, 1995
82.    G.P. CELATA, M. CUMO and T. SETARO, Heat Transfer in Vertical Forced Convective Boiling of Binary Mixtures, Proc. International Conference on Convective Flow Boiling, Banff 30 April-5 May, 1995
83.    G.P. CELATA, M. CUMO and A. MARIANI, The Effect of the Tube Diameter on the Critical Heat Flux in Subcooled Flow Boiling, Int. J. Heat Mass Transfer, Vol. 39, n. 8, pp. 1755-1757, 1996
84.    G.P. CELATA, M. CUMO and A. MARIANI, Experimental Evaluation of the Onset of Subcooled Flow Boiling at High Liquid Velocity and Subcooling, Int. J. Heat Mass Transfer, Vol. 40, n. 12, pp. 2879-2885, 1997
85.    G.P. CELATA, G. DELL'ORCO and G.P. GASPARI, Detection of Subcooled Boiling Heat Transfer Regimes up to Critical Heat Flux by Accelerometric Equipment, Fusion Engineering and Design, Vol. 28, pp. 44-52, 1994
86.    G. CANTI, G.P. CELATA, M. CUMO and M. FURRER, Thermal Hydraulic Characterization of Stainless Steel Wicks for Heat Pipe Applications, Revue Generale de Thermique, Vol. 37, n. 1, pp. 5-16, 1998
87.    G.P. CELATA, M. CUMO and A. MARIANI, Geometrical Effects on the Subcooled Flow Boiling Critical Heat Flux, Revue Generale de Thermique, Vol. 36, n. 11, pp. 807-814, 1997
88.    G.P. CELATA and G. GUIDI, Problems About the Sizing of Two-Phase Flow Safety Valves, Heat & Technology, Vol. 14, n. 1, pp. 67-96, 1996
89.    G.P. CELATA, Critical Heat Flux in Subcooled Flow Boiling: Experimentation and Modelling, Keynote Paper, 2nd European Thermal-Sciences and 14th UIT National Heat Transfer Conference, Vol. I, pp. 27-40, May 29-31, 1996
90.    G.P. CELATA, On the Application Method of Critical Heat Flux Correlations, Nuclear Engineering & Design, Vol. 163, pp. 241-242, 1996
91.    G.P. CELATA and M. CUMO, Forced Convective Boiling of Refrigerant Binary Mixtures, Keynote Paper, Proc. 4th International Symposium on Heat Transfer, Beijing, 7-11 October 1996
92.    G.P. CELATA, M. CUMO and T. SETARO, Vertical Forced Convective Boiling of Refrigerant Binary Mixtures, Revue Generale de Thermique, Vol. 36, n. 4, pp. 253-263, 1997
93.    G.P. CELATA, Modelling of Critical Heat Flux in Subcooled Flow Boiling, Keynote Lecture, International Symposium on the Physics of Heat Transfer in Boiling and Condensation, Moscow, 21-24 May 1997
 Keynote lecture, Convective Flow and Pool Boiling Conference, Irsee, 18-23 May 1997
94.    M.W. WAMBSGANSS, R.K. SHAH, G.P. CELATA and G. ZUMMO, Vaporization in Compact Heat Exchangers, Invited Lecture, Proc. 4th World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics, Bruxelles, Vol. IV, pp. 2049-2062, 1997
95.    G.P. CELATA, A. CHIARADIA, M. CUMO and F. D'ANNIBALE, Heat Transfer Enhancement by Air Injection in Mixed and Forced Convective Flow, Proceedings of the 5th UK National Heat Transfer Conference, London, 17-18 September 1997
96.    G.P. CELATA, M. CUMO and T. SETARO, Reduction of Boiling Incipience Hysteresis of Highly-Wetting Fluids Using Frequency Modulation of Pressure Wave Perturbations, Presented at XV UIT National Heat Transfer Conference, Turin, 18-19 June 1997
97.    G.P. CELATA, G. ZUMMO and K. MISHIMA, A Dryout Model for Water in Pipes, Proceedings of the 10th International Symposium on Transport Phenomena, Vol. 2, pp. 361-366, Kyoto, 30 November-3 Dicember, 1997
98.    G.P. CELATA, M. CUMO AND A. MARIANI, High heat Flux Burnout in Subcooled Flow Boiling: Experimentation and Modelling, Italian Academy of Sciences, Serie V, Vol. XXI, Parte II, Tomo I, 1997
99.    G.P. CELATA, M. CUMO, Y. KATTO and A. MARIANI, Prediction of the Critical Heat Flux in Water Subcooled Flow Boiling Using a New Mechanistic Approach, Int. J. Heat Mass Transfer, Vol. 42, pp. 1457-146, 1999
100.    G.P. CELATA, A. CHIARADIA, M. CUMO and F. D'ANNIBALE, Heat Transfer in Upward Mixed Convective Flow of Water in a Vertical Channel, 11th International Heat Transfer Conference, Kyongju, 23-28 August 1998
101.    G.P. CELATA, M. CUMO, A. MARIANI, D. GALLO and G. ZUMMO, Visual Investigation of High Heat Flux Burnout in Subcooled Flow Boiling of Water, 3rd International Conference on Multiphase Flow, Lyon, 8-12 June 1998
102.    G.P. CELATA, Critical Heat Flux in Subcooled Flow Boiling, Keynote Lecture, 11th International Heat Transfer Conference, Kyongju, August 23-28, 1998, Int. J. Heat & Technology, Vol. 16, n. 1, pp. 11-28, 1998
103.    L. BELLA, G.P. CELATA, A. LYNEN and A. MORGANA, Ceramic Bayonet Tubes Ultra High Temperature Heat Exchanger (UHTHE) for Advancing Coal EFCC Plants: Thermomechanical Sizing and Design, International Conference on Heat Exchangers for Sustainable Development, Lisbon, June 15-18, 1998
104.    G. BOCCARDI, G.P. CELATA, M. CUMO, A. GEROSA, A. GIULIANI and A. ZORZIN, The Use of New Refrigerants on Compact Heat Exchangers for the Refrigeration Industry, Heat Transfer Engineering, Vol. 21, n. 4, pp. 53-62, 2000
105.    G.P. CELATA, A. CHIARADIA, M. CUMO and F. D'ANNIBALE, Heat Transfer Enhancement by Air Injection in Upward Heated Mixed Convective Flow, Int. J. Multiphase Flow, Vol. 25, nn. 6-7, pp. 1033-1052, 1999
106.    G.P. CELATA, M. CUMO, A. MARIANI and G. ZUMMO, Physical Insight in the Burnout Region of Water-Subcooled Flow Boiling, Revue Generale de Thermique, Vol. 37, pp. 450-458, 1998
107.    G. BOCCARDI, G.P. CELATA, M. CUMO, A. GEROSA, A. GIULIANI and A. ZORZIN, Alternative Refrigerant Performance in Plate Heat Exchangers for Air Conditioning, EUROTHERM Seminar 62, Heat Transfer in Condensation and Evaporation: Application to Industrial and Environmental Processes, Grenoble, November 17-18, 1998, Int. J. Heat & Technology, Vol. 17, n. 2, pp. 91-100, 1999
108.    G.P. CELATA, A. CHIARADIA, M. CUMO and F. D'ANNIBALE, Upflow Turbulent Mixed Convection Heat Transfer in Vertical Pipes, Int. J. Heat Mass Transfer, Vol. 41, pp. 4037-4054, 1998
109.    G. BOCCARDI, G.P. CELATA, M. CUMO, A. GEROSA, F. MARCHESI DONATI and A. ZORZIN, Alternative Refrigerant Performance in Plate Heat Condensers for Air Conditioning, International Conference on Compact Heat Exchangers and Enhancement Tecnology for Process Industries, Banff, July 18-23, 1999
110.    G.P. CELATA, M. CUMO, F. D'ANNIBALE, F. GUGLIERMETTI and G. GUIDI, Direct Contact Boiling of Initially Subcooled R 114 into Water, Int. J. Heat and Technology, Vol. 17, n. 1, pp. 75-83, 1999
111.    G.P. CELATA, M. CUMO and A. MARIANI, Visual Investigation of High Heat Flux Burnout in Subcooled Flow Boiling of Water, International Symposium on Applied Optical Measurements, Munich, 23-24 September 1999 (pp. 79-93)
112.    G.P. CELATA, Thermal Hydraulic Problems in Fusion Reactor High Heat Flux Components, International Symposium on Energy and Environment: Technological Challenges for the Future, Yokohama, 25-27 November 1999
113.    G. BOCCARDI, G.P. CELATA, M. CUMO, A. GEROSA, F. MARCHESI DONATI and A. ZORZIN, R-22 Replacement Aspects In Compact Heat Exchangers For Air Conditioning, International Journal of Heat Exchangers, Vol. 1, n. 1, pp. 77-92, 2000
114.    G.P. CELATA, K. MISHIMA and G. ZUMMO, Critical Heat Flux Prediction for Saturated Flow Boiling of Water in Vertical Tube, Int. J. Heat Mass Transfer, Vol. 44, pp. 4323-4331, 2001
115.    G.P. CELATA, M. CUMO, M. GUGLIELMI and G. ZUMMO, Experimental Investigation of Hydraulic and Single Phase Heat Transfer in 0.130 mm Capillary Tube, Microscale Thermophysical Engineering, Vol. 6, n. 2, pp. 85-97, 2002
116.    G.P. CELATA, Visual Investigation of Boiling Crisis in Subcooled Flow Boiling, 2nd Japanese-European Two-Phase Flow Group Meeting, Keynote lecture, Tsukuba, 24-28 September 2000
117.    G.P. CELATA, M. CUMO, F. D'ANNIBALE and A. TOMIYAMA, Bubble Rising Velocity in Saturated Liquid up to the Critical Pressure, Proc. 5th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Thessaloniki, 24-28 September 2001
118.    G.P. CELATA, M. CUMO, A. MARIANI and G. ZUMMO, Finite Elements Simulation of Thermal Crisis Mechanisms in Subcooled Flow Boiling in Transient Conditions, 2nd Japanese-European Two-Phase Flow Group Meeting, Tsukuba, 24-28 September 2000
119.    G.P. CELATA, M. CUMO, A. MARIANI and G. ZUMMO, Burnout in Subcooled Flow Boiling of Water. A Visual Experimental Study, International Journal of Thermal Sciences, Vol. 39, nn. 9-10-11, pp. 896-908, 2000
120.    G. CANTI, G.P. CELATA, M. CUMO and M. FURRER, Thermal Hydraulic Characterization of a Heat Pipe with Extracapillary Circulation, International Journal of Thermal Sciences, Vol. 41, pp. 115-123, 2002
121.    A. TOMIYAMA, G.P. CELATA, S. HOSOKAWA and S. YOSHIDA, Terminal Velocity of Single Bubbles in Surface Tension Force Dominant Regime, International Journal of Multiphase Flow, Vol. 28, pp. 1497-1519, 2002
122.    G.P. CELATA, M. CUMO, F. D'ANNIBALE and A. TOMIYAMA, On the Wake Effect in Bubble Rising Velocity for One-Component Systems, 12th International Heat Transfer Conference, pp. 485-490, Grenoble, 18-23 August 2002
123.    G.P. CELATA, M. CUMO, F. D'ANNIBALE and A. TOMIYAMA, Terminal Bubble Rising Velocity in One-Component Systems, European Two-Phase Flow Group Meeting, Paper F3, Aveiro, 18-20 June 2001
124.    G.P. CELATA, M. CUMO and A. MARIANI, Rewetting of Hot Surfaces by Droplet Impingement, European Two-Phase Flow Group Meeting, Paper B1, Stockholm, 10-13 June 2002
125.    G.P. CELATA, Modeling of Critical Heat Flux in Subcooled Flow Boiling, European Two-Phase Flow Group Meeting, Keynote lecture, Stockholm, 10-13 June 2002
126.    G.P. CELATA, M. CUMO and G. ZUMMO, Thermal-Hydraulic Characterization of Single-Phase Flow in Capillary Tubes, International Symposium on Compact Heat Exchangers, Keynote lecture, pp. 43-49, Grenoble, 24 August 2002, Experimental Thermal and Fluid Science, Vol. 28, pp. 87-95, 2004
127.    G.P. CELATA and G. CORALLO, A New Plate Heat Exchanger for Water-Ammonia Absorption Machines, International Symposium on Compact Heat Exchangers, pp. 289-292, Grenoble, 24 August 2002
128.    C. ALIMONTI, G. BOCCARDI and G.P. CELATA, Water Two-Phase Flow Through a Convergent-Divergent Nozzle with Variable Backpressure: Check of Calculation Method to Estimate Mass Flow rate and Critical Flow Conditions, 7th International Conference on Multiphase Flow in Industrial Plants, Bologna, 14-16 September 2000
129.    G. BOCCARDI, R. BUBBICO, G.P. CELATA and M. CUMO, Water Two-Phase Flow Through pressure safety valve with Variable Backpressure: Check of Calculation Methods to Estimate Mass Flow-rate and Critical Flow Conditions, 8th International Conference on Multiphase Flow in Industrial Plants, Alba, 18-20 September 2002
130.    G. CANTI, G.P. CELATA, M. CUMO and M. FURRER, Transient Behaviour of a Heat Pipe with Extracapillary Circulation, Tsinghua Science and Technology, Vol. 7, n. 2, pp. 135-145, 2002
131.    G.P. CELATA, M. CUMO, C. LOMBARDO, A. MARIANI and L. SARACENO, Experimental Results on Rewetting of Hot Surfaces by Droplet Impingement, Experimental Thermal and Fluid Science, Vol. 29, pp. 275-285, 2005
132.    G.P. CELATA, Single-Phase Heat Transfer and Fluid Flow in Micropipes, Keynote Lecture at the 1st International Conference on Mini- and Microchannels, Rochester, 24-25 April 2003, Heat Transfer Engineering, Vol. 25, n. 3, pp. 13-22, 2004
133.    G.P. CELATA, M. CUMO, A. MARIANI and L. SARACENO, Rewetting of Hot Surfaces by Droplet Impingement: Effect of the Spray Impact Point, European Two-Phase Flow Group Meeting, Tromso-Trondheim, 11-13 May 2003
134.    G.P. CELATA, M. CUMO, F. D'ANNIBALE and A. TOMIYAMA, The Wake Effect in Bubble Rising Velocity for One-Component Systems, International Journal of Multiphase Flow, Vol. 30, pp. 939-961, 2004
135.    G.P. CELATA, F. D'ANNIBALE, P. DI MARCO, G. MEMOLI and A. TOMIYAMA, Measurements of Rising Velocity of a Small Bubble in a Stagnant Fluid in One- and Two-Component Systems, Experimental Thermal and Fluid Science, Vol. 31, pp. 609-623, 2007
136.    A. BUCCI, G.P. CELATA, M. CUMO, E. SERRA and G. ZUMMO, Water Single-Phase Fluid Flow and Heat Transfer in Capillary Tubes, Thermal Science and Engineering, Vol. 11, n. 6, pp. 81-89, 2003
137.    G. BOCCARDI, R. BUBBICO, G.P. CELATA and M. CUMO, Water Two-Phase Flow through Pressure Safety Valve with Variable Backpressure: Check of Calculation Methods to Estimate Mass Flow Rate and Critical Flow Conditions, European Two-Phase Flow Group Meeting, Tromso-Trondheim, 11-13 May 2003
138.    G.P. CELATA, M. CUMO, A. MARIANI and G. ZUMMO, Visual Investigation of Boiling Crisis in Subcooled Flow Boiling, The Arabian Journal for Science and Engineering, Vol. 27, pp. 67-89, 2002
139.    G.P. CELATA, M. CUMO, F. D'ANNIBALE, P. DI MARCO, A. TOMIYAMA and C. ZOVINI, Effect of Gas Injection Mode and Purity of Liquid on Bubble Rising in Two-Component Systems, Experimental Thermal and Fluid Science, Vol. 31, pp. 37-53, 2006
140.    G. BOCCARDI, R. BUBBICO, G.P. CELATA, M. CUMO, and F. DI TOSTO, Geometry Influence on Two-Phase Flow in Safety Valves, ICMF2001, International Conference on Multiphase Flow, Paper n. 478, Yokohama, May 30 – June 4, 2004
141.    M. CASAMIRRA, F. CASTIGLIA, M. GIARDINA, C. LOMBARDO, G.P. CELATA, A. MARIANI and L. SARACENO, Rewetting of a Hot Vertical Surface by Liquid Sprays, Experimental Thermal and Fluid Science, Vol. 29, pp. 885-891, 2005
142.    A. TOMIYAMA, K. SAKODA, G.P. CELATA and I. ZUN, A Simple Method for Evaluating Fluctuating Bubble Velocity and its Application to a Hybrid Bubble Tracking Method, ISTPME2004, 3rd International Symposium on Two-Phase Flow Modelling and Experimentation, Pisa, 22-25 September 2004
143.    G. BOCCARDI, R. BUBBICO, G.P. CELATA and B. MAZZAROTTA, Two-Phase Flow through Pressure Safety Valves with Variable Backpressure. Experimental Investigation and Model Prediction, Chemical Engineering Science, Vol. 60, pp. 5284-5293, 2005
144.    G.P. CELATA, M. CUMO, A. MARIANI and L. SARACENO, Parametric Effects on Rewetting Hot Surfaces by Droplet Impingement, 6th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Matsushima, 17-21 April 2005
145.    G.P. CELATA, M. CUMO, F. D'ANNIBALE and P. DI MARCO, On the Reciprocal Influence of Gas Injection Method and Liquid Contamination on Bubble Rising Velocity in a Liquid Column, 23rd UIT National Heat Transfer Conference, Parma, 20-22 June 2005
146.    G.P. CELATA, Flow Boiling Heat Transfer in Microgravity, Keynote Lecture at the 8th Australasian Heat & Mass Transfer Conference (8AHMTC), Perth, 26-29 July 2005
147.    G.P. CELATA, K. CHMIEL, S. MCPHAIL, R. MERTZ, E. SOBIERSKA and G. ZUMMO, Single-Phase Heat Transfer in Microchannels: Rectangular vs. Circular, IIR International Conference on Thermophysical Properties and Transfer Processes of Refrigerants, Vicenza,  31 Agosto - 2 Settembre 2005
148.    G.P. CELATA, Single-Phase Heat Transfer and Fluid Flow in Micropipes, Keynote Lecture at Euromech Colloquium 472 on Microfluidics and Transfer,  Grenoble,  6-8 September 2005
149.    G.P. CELATA, M. CUMO, A. MARIANI and L. SARACENO, A Comparison Between Spray Cooling and Flim Flow Cooling During the Rewetting of a Hot Surface, Heat and Mass Transfer, Heat and Mass Transfer, Vol. 45, pp. 1029-1035, 2009

150.    G.P. CELATA, M. CUMO, M. GERVASI and G. ZUMMO, Quenching Experiments of Hot Tubes in Microgravity, 6th ECI International Conference on Boiling Heat Transfer, Spoleto, 7-12 May 2006
151.    G.P. CELATA, M. CUMO, M. GERVASI and G. ZUMMO, Flow Pattern Analysis of Flow Boiling in Microgravity, Multiphase Science and Technology, Vol. 19, n. 2, pp. 183-210, 2007
152.    G.P. CELATA, M. CUMO, S. MCPHAIL, L. TESFAGABIR and G. ZUMMO, Experimental Study on Compressible Flow in Microtubes, International Journal of Heat and Fluid Flow, Vol. 28, pp. 28-36, 2006
153.    G.P. CELATA, V. MARCONI, G.L. MORINI, S. MCPHAIL and G. ZUMMO, Using Viscous Heating to Determine the Friction Factor in Microchannels. An Experimental Validation, Experimental Thermal Fluid Science, Vol. 30, pp. 725-731, 2006
154.    G.P. CELATA, M. CUMO, V. MARCONI, S. MCPHAIL and G. ZUMMO, Microtube Liquid Single-Phase Heat Transfer in Laminar Flow, International Journal of Heat and Mass Transfer, Vol. 49, pp. 3538-3546, 2006
155.    G.P. CELATA, M. CUMO, S. MCPHAIL and G. ZUMMO, Characterization of Fluid Dynamic Behaviour and Channel Wall Effects in Microtube, International Journal of Heat and Fluid Flow, Vol. 27, pp. 135-143, 2006
156.    G.P. CELATA, M. CUMO and A. MARIANI, Visualization of the Impact of Water Drops on a Hot Surface: Effect of Drop Velocity and Surface Inclination, Heat Mass Transfer, Vol. 42, pp. 885-890, 2006
157.    G.P. CELATA, M. CUMO, D. GALLO, A. MARIANI and G. ZUMMO, A Photographic Study of Subcooled Flow Boiling at High Heat Flux and Velocity, International Journal of Heat and Mass Transfer, Vol. 50, pp. 283-291, 2007
158.    G.P. CELATA and A. MARIANI, Parametric Study of Heat Flux in the Quenching of Hot Surfaces by Spray Impingement, DITICE Workshop, Bergamo, 19 May 2006
159.    G.P. CELATA, M. CUMO, A. MARIANI and L. SARACENO, Heat Flux and Heat Transfer Coefficient in the Quenching of Hot Surfaces by Drop Impingement, 13th International Heat Transfer Conference, Sydney, 13-18 August 2006
160.    G.P. CELATA, Flow Boiling Heat Transfer in Microgravity, Keynote Lecture at the 13th International International Heat Transfer Conference, Sydney, 13-18 August 2006
161.    G. BOCCARDI, R. BUBBICO, G.P. CELATA, F. DI TOSTO, B. MAZZAROTTA and R. TRINCHIERI, Size and Geometry Influence in Pressure Safety Valves Design in Two-Phase Flow. Comparison Among Three Prediction Methods, 10th ANIMP International Conference on Multiphase Flow in Industrial Plants, Tropea, 20-22 September 2006
162.    G.P. CELATA, M. CUMO, S. MCPHAIL and G. ZUMMO, Single-Phase Laminar and Turbulent Heat Transfer in Smooth and Rough Microtubes, Microfluidics and Nanofluididics, Vol. 3, pp. 697-707, 2007
163.    G. BOCCARDI, R. BUBBICO and G.P. CELATA, Geometry Influence on Two-Phase Flow in Safety Valves, Journal of Loss Prevention in the Process Industries, Vol. 21, pp. 66-73, 2008
164.    G. BOCCARDI, R. BUBBICO and G.P. CELATA, Discharge Coefficient for Two-Phase Flow through Pressure Relief Valves. Comparison Between Experimental Investigation and Model Prediction, submitted for publication in the Chemical Engineering Sciences
165.    G.P. CELATA, M. CUMO, S. McPHAIL, G. ZUMMO, Fluid Flow and Heat Transfer for Microtechnologies, Italian Academy of Sciences, vol. 123, series V, vol. XXIX, part II, pp.67-89, 2006
166.    G.P. CELATA, K. CHMIEL, R. KULENOVICH, C. MARTIN-CALLIZO, S. McPHAIL, R. MERTZ, W. OWHAIB, G. ZUMMO, Frictional Pressure Drop in Single-Phase Flow in Narrow Channels, 4th International Conference on Nanochannels, Microchannels and Minichannels, Limerick, Ireland, 19-21 June 2006
167.    P.K. SARMA, V. SRINIVAS, K.V. SHARMA, V. DHARMA RAO and G.P. CELATA, A Correlation to Evaluate Critical Heat Flux in Small Diameter Tubes under Subcooled Conditions of the Coolant, Int. J. Heat Mass Transfer, Vol. 49, pp. 42-51, 2006
168.    G.P. CELATA, Review of Flow Boiling Heat Transfer under Microgravity Conditions, Australian Journal of Mechanical Engineering, Vol. 4, n. 1, pp. 1-14, 2006
169.    G.P. CELATA, M. CUMO, M. GERVASI and G. ZUMMO, Quenching Experiments Inside 6.0 mm Tube at Reduced Gravity, International Journal of Heat and Mass Transfer, Vol. 52, pp. 2807-2814, 2009
170.    G.P. CELATA, M. CUMO, and G. ZUMMO, Quenching Experiments in Microgravity, Invited Lecture, 3rd International Symposium on Physical Sciences in Space, ISPS2007, Nara, 22-26 October 2007, Journal of The Japan Society of Microgravity Application, Vol. 25, n. 3, pp. 251-256, 2008
171.    G.P. CELATA, Flow Boiling Heat Transfer in Microgravity: Recent Results, Keynote Lecture, 2nd International Topical Team Workshop on Two-phase Systems for Ground and Space Applications, Kyoto, 26-28 October 2007. Published in the International Journal for Microgravity Science and Technology, Vol. XIX, n. 3-4, pp. 13-17, 2007
172.    A. CATTIDE, G.P. CELATA, P. DI MARCO and W. GRASSI, Experimental Study on Bubble Detachment under Variable Heat Load and the Action of Electric Field, Fluid Dynamics Research, Vol. 40, pp. 485-496, 2008
173.    G.P. CELATA, M. LORENZINI, S. MCPHAIL, G.L. MORINI and G. ZUMMO, Experimental Analysis of Liquid Forced Convection in Rough Microtubes, EUROTHERM 2008, 5th European Thermal Sciences Conference, Eindhoven, 19-22 May, 2008
174.    G. BOCCARDI, G.P. CELATA, R. LAZZARINI, L. SARACENO and R. TRINCHIERI, Development of a Mechanically Aided Heat-Transfer Correlation, EUROTERHM 2008, 5th European Thermal Sciences Conference, Eindhoven, 19-22 May 2008
  
 175.    G. BOCCARDI, G.P. CELATA, R. LAZZARINI, L. SARACENO and R. TRINCHIERI, Agitator Speed Effect on Heat Transfer Performance of a Scraped-Surface Heat Exchangers, 11th International Conference on Multiphase Flow in Industrial Plants, ANIMP, Palermo, 7-10 September 2008
176.    G.P. CELATA, Single- and Two-Phase Flow Heat Transfer in Micropipes, Keynote lecture, EUROTHERM 2008, 5th European Thermal Sciences Conference, Eindhoven, 19-22 May, 2008
177.    G.P. CELATA and G. ZUMMO, Flow Boiling in Microgravity, Keynote lecture, EBECEM, 1° Encontro Brasileiro sobre Ebulição, Condensação e Escoamento Multifásico Líquido-Gás, Florianopolis, 28-29 April 2008
178.    G.P. CELATA and G. ZUMMO, Flow Boiling Heat Transfer in Microgravity: Recent Progress, Distinguished Plenary Lecture, HEAT2008 – 5th International Conference on Transport Phenomena in Multiphase Systems, Bialystok, 30 June – 3 July 2008
179.    G.P. CELATA, M. LORENZINI, G.L. MORINI and G. ZUMMO, Friction Factor in Micropipe Gas Flow under Laminar, Transition and Turbulent Flow Regime, International Journal of Heat and Fluid Flow, Vol. 30, pp. 814-822, 2009
180.    G.L. MORINI, M. LORENZINI, S. SALVIGNI and G.P. CELATA, Experimental Analysis of Micro-Convection Heat Transfer in the Transition Region, Experimental Heat Transfer, Vol. 23, pp. 73-93, 2010

 181.    G. BOCCARDI, G.P. CELATA, R. LAZZARINI, L. SARACENO and R. TRINCHIERI, Experimental Research on a Scraped Surface Heat Exchanger, ExHFT-7, 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Krakow, 28 June 3 July 2009
182.    R.K. SHAH and G.P. CELATA, Microchannel Heat Transfer and Pressure Drop Performance: Single-Phase, Boiling and Condensation, ExHFT-7, 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Krakow, 28 June 3 July 2009
183.    G.P. CELATA, M. CUMO, F. D’ANNIBALE, L. SARACENO and G. ZUMMO, Rewetting Velocity in Quenching at Reduced Gravity, International Journal of Thermal Sciences, Vol. 49, pp. 1567-1575, 2010

184.    G.P. CELATA, Flow Boiling Heat Transfer in Microgravity, ECI International Conference on Boiling Heat Transfer, Florianopolis, 3-7 May 2009
185.    B. VERTHIER, G.P. CELATA, G. ZUMMO, C. COLIN and J. FOLLET, Effect of Gravity on Film Boiling Heat Transfer and Rewetting Temperature during Quenching, Microgravity Science and Technology, Vol. 21 (Suppl. 1), pp. 185-191, 2009
186.    G.P. CELATA and G. ZUMMO, Flow Boiling Heat Transfer in Microgravity: Recent Progress, Multiphase Science and Technology, Vol. 21, n. 3, pp. 187-212, 2009
187.    G.P. CELATA, M. CUMO and M. FURRER, Experimental Tests of a Stainless Steel Loop Heat Pipe with Flat Evaporator, Experimental Thermal and Fluid Science, Vol. 34, pp. 866-878, 2010
188.    G.P. CELATA, Microscale Heat Transfer in Single- and Two-Phase Flows: Scaling, Stability and Transition, International Journal of Microscale and Nanoscale Thermal & Fluid Transport Phenomena, Vol. 1, n. 1, pp. 7-36, 2010
189.    S.K. SAHA, G. ZUMMO and G.P. CELATA, Review on Flow Boiling in Microchannels, International Journal of Microscale and Nanoscale Thermal & Fluid Transport Phenomena, Vol. 1, n. 2, pp. 111-178, 2010
190.    G.P. CELATA, S.K. SAHA, G. ZUMMO and D. DOSSEVI, Heat Transfer Characteristics of Flow Boiling in a Single Horizontal Microchannel, International Journal of Thermal Sciences, Vol. 49, pp. 1086-1094, 2010

 191.    G. BOCCARDI, G.P. CELATA, R. LAZZARINI, L. SARACENO and R. TRINCHIERI, Development of a Heat Transfer Correlation for a Scraped Surface Heat Exchanger, Applied Thermal Engineering, Vol. 30, pp. 1101-1106, 2010
192.    G.P. CELATA, A. MARIANI and L. SARACENO, Spray Cooling of a Non-Metallic High Temperature Wall, Atomization and Sprays, Vol. 19, n. 12, pp. 1137-1146, 2009
193.    G.P. CELATA, M. CUMO, D. DOSSEVI, R.T.M. JILISEN, S.K. SAHA, and G. ZUMMO, Visualisation of Flow Boiling Heat Transfer in a Microtube, Heat and Mass Transfer, Vol. 47, pp. 941-949, 2011
194.    S.K. SAHA and G.P. CELATA, Advances in Modelling of Biomimetic Fluid Flow at Different Scales, Nanoscale Research Letters, Vol. 6, pp. 344-354, 2011, http://www.nanoscalereslett.com/content/6/1/344
195.    G.F. CANTI, G.P. CELATA, M. CUMO, M. FURRER and L. SARACENO, Effect of Droplet Generation in the Boiling Limit Conditions: Heat Pipe Visualization, Int. J. Thermal Sciences, Vol. 52, pp.1-7, 2011
196.    L. SARACENO, G. BOCCARDI, G.P. CELATA, R. LAZZARINI, and R. TRINCHIERI, Development of Two Heat Transfer Correlations for a Scraped-Surface Heat Exchanger in an Ice Cream Machine, Applied Thermal Engineering, Vol. 31, pp. 4106-4112, 2011
197.    S.K. SAHA, G.P. CELATA, and S.G. KANDLIKAR, Thermo-Fluid Dynamics of Boiling in Microchannels, Advances in Heat Transfer, Vol. 43, pp. 79-228, 2011

 198.    C. BALTIS, G.P. CELATA, M. CUMO and G. ZUMMO, Gravity Influence on Heat Transfer Rate in Flow Boiling, Microgravity Science and Technology, Vol. 24, pp. 203-213, 2012
199.    L. SARACENO, G.P. CELATA, M. FURRER, A. MARIANI, and G. ZUMMO, Flow Boiling Heat Transfer of Refrigerant FC-72 in Microchannels, Int. J. Thermal Sciences, Vol. 53, pp. 35-41, 2012


200.    G.P. CELATA, M. CUMO, D. DOSSEVI, R.T.M. JILISEN, S.K. SAHA, and G. ZUMMO, Flow Pattern Analysis of Flow Boiling Inside a 0.48 mm Microtube, Int. J. Thermal Sciences, Vol. 58, pp. 1-8, 2012
201.    H. CHALABI, L. SARACENO, G. BOCCARDI, G.P. CELATA, M. LORENZINI, and G.L. MORINI, Experimental Analysis of Heat Conduction in High Diameter Ratio Annular Gap Filled with a Rarefied Gas, 6th European Thermal Science Conference EUROTHERM 2012, paper 03663, Poitiers, September 4-7, 2012
202.    G.P. CELATA, F. D’ANNIBALE, A. MARIANI, L. SARACENO, R. D’AMATO, and R. BUBBICO, Heat Transfer in Water-Based SiC and TiO2 Nanofluids, Heat Transfer Engineering, Vol. 34, nn. 13, pp. 1060-1072, 2013

203.    G. BOCCARDI, N. CALABRESE, G.P. CELATA,  R. MASTRULLO, A.W. MAURO, A. PERRONE, and R. TRINCHIERI, Experimental Performance Evaluation for a Carbon Dioxide Light Commercial Cooling Application under Transcritical and Subcritical Conditions, Applied Thermal Engineering, Vol, 54, pp. 528-535, 2013

204.     M. FURRER, L. SARACENO, A. MARIANI, and G.P. CELATA, Capillary Pressure Influence on Open Channels Pressure Drop, Int. J. Thermal Sciences, Vol. 70, pp. 102-113, 2013

TOP